Thông tin chi tiết sản phẩm:
Thanh toán:
|
Dimensions (W x D x H): | 71 x 94 x 26 mm | Weight: | 200g |
---|---|---|---|
Power Requirements: | AC 100-240V 50/60Hz 0.15A Max | Power Consumption: | <3W |
100/1000M auto-sensation: | support | Storage Temperature: | -10~70 degrees C |
Operating Temperature: | 0~50 degrees C | Regulation Compliance: | CE, RoHS and FCC |
Điểm nổi bật: | fiber optic ethernet media converter,gigabit ethernet media converter |
10/100/1000 BASE-T to 100/1000 BASE-X SFP Media Converter Fiber To Ethernet Built in Power Supply
Overview
LNK-3012-SFP is equipped with one 10/100/1000BASE-T RJ45 copper and one 100/1000BASE-X SFP fiber optic interface with built-in power supply. The media converter fulfills 100/1000M auto-sensation at fiber optic port, which increase the flexibility of the whole network. The SFP slot of the LNK-3012-SFP is compatible with 100BASE-FX and 1000BASE-SX / LX / WDM through SFP fiber-optic transceivers.
Customer can easily migrate from 100M fiber to Gigabit without changing customer premise equipment (CPE). Start using the LNK-3012-SFP in your current 100M infrastructure. When you are ready to move to Gigabit Ethernet, only change the central switch and all the LNK-3012-SFP will automatically adjust to Gigabit speed. This cuts the number of customer visits in half and reduce installation cost with 50%. No need for proprietary equipment, it is compatible with you existing Ethernet products and follows all the accepted standards.
Features
· 1-port 10/100/1000BASE-T RJ45 with auto MDI / MDI-X function
· 1 SFP interface, 100/1000BASE-X dual mode (auto detection)
· IEEE 802.3 / 802.3u / 802.3ab / 802.3z Ethernet standard compliant
· Supports auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
· Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
· 9K jumbo frame size support
· LFP function support
· Supporting low-time lag transmission
· Built-in Power Supply
· Extremely low power consumption (less than 3W), reliable and stable performance
Technical Indexes
Hardware Specifications | |
Copper Interface | 1 x 10/100/1000BASE-T RJ45 TP |
Auto-MDI/MDI-X, auto-negotiation | |
Fiber Optic Interface | 1 x 1000BASE-SX/LX/BX SFP interface. |
Compatible with 100BASE-FX SFP | |
Connector | Removable 6-pin terminal block |
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2 | |
Alarm | Provides one relay output for power failure |
Alarm relay current carry ability: 1A @ DC 24V | |
LED | ■ TP: 10M |
■ TP: 100M | |
■ TP: 1000M | |
■ FX: 100M | |
■ FX: 1000M | |
■ PWR | |
Dimensions (W x D x H) | 71 x 94 x 26 mm |
Weight | 200g |
Power Requirements | AC 100-240V 50/60Hz 0.15A Max |
Power Consumption / Dissipation | <3W |
Network Cables | 10/100/1000BASE-T: |
Cat3, 4, 5, 5e, 6 UTP cable (100 meters, max.) | |
EIA/TIA-568 100-ohm STP (100 meters, max.) | |
1000BASE-SX: | |
50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 550m (varying on SFP module) | |
1000BASE-LX: | |
9/125μm single-mode fiber optic cable, up to 10/20/30/40/50/60/70/120 kilometers (varying on SFP module) | |
100BASE-FX: | |
50/125μm or 62.5/125μm multi-mode fiber optic cable, up to | |
2 kilometers (varying on SFP module) | |
9/125μm single-mode fiber optic cable, up to 20/40/60 kilometers (varying on SFP module) | |
Standards Conformance | |
Standards Compliance | IEEE 802.3 10Base-T |
IEEE 802.3u 100Base-TX | |
IEEE 802.3ab 1000Base-T | |
IEEE 802.3z 1000Base-SX/LX | |
Regulation Compliance | CE, RoHS and FCC |
Environment | |
Temperature | Operating: 0~50 degrees C |
Storage: -10~70 degrees C | |
Humidity | Operating: 5~95% (non-condensing) |
Storage: 5~95% (non-condensing) |
*Specifications subject to change without notice.
Người liên hệ: Mr. Michael Guo
Tel: 19928768315
Fax: 86-755-8312-8674
E-Link Gigabit Power Over Ethernet In phun 12 ~ 48VDC Đầu vào DIN Rail / Wall Mount
Cổng đơn 60W Cấp nguồn qua các thiết bị Ethernet Hỗ trợ Cài đặt Din Rail / Wall Mount
10/100 / 1000Mbps Công suất cao Poe In phun 95 watt 802.3bt Truyền 100m
48 Volt 2 Port Cisco POE Power Over Ethernet Injector 10 / 100 / 1000Mbps 15.4W
Bộ mở rộng quang Mini 4K HDMI Đầu vào USB đa chế độ không nén 300M
Bộ mở rộng sợi HDMI 4K SFP LC 80km Bộ mở rộng sợi quang đơn mode 10,3Gbps
SFP 5VDC HDMI qua Bộ mở rộng cáp quang Cổng Micro 4K USB 80Km
Bộ mở rộng cáp quang HDMI 4K * 2K HDCP 10,3Gbps SFP LC với âm thanh bên ngoài
Mini 3G / HD-SDI to Fibre Converter Extender với chức năng Tally hoặc RS485 Data
Bộ mở rộng video 3G-SDI SDI sang bộ chuyển đổi sợi quang qua đường truyền dài 20KM sợi quang
HD SDI To Fiber Optic Converter with Forward Audio
Ethernet over Fiber Converter SD/HD/3G-SDI + RS485/RS422/RS232 Data + 10/100M