Thông tin chi tiết sản phẩm:
Thanh toán:
|
Name: | Manageable Media Converter | Connector: | ST, SC, FC, LC |
---|---|---|---|
Wavelength: | MM: 850nm, 1310nm 1310nm; SM:1550nm | Management port: | 1 console (RJ45) |
Transmission distance: | Dual fiber: 100km, Single fiber: 80km | Working Temperature: | 0℃~60℃ |
Power supply: | 85V AC~265V AC or -40V DC~-57V DC | Power consumption: | ≤5W |
Điểm nổi bật: | fiber optic ethernet media converter,gigabit ethernet media converter |
E-link 10 / 100M One to One Manageable Fast Ethernet Media Converter with Internal Power Supply
Overview
10 / 100M IEEE802.3ah OAM manageable Ethernet Fiber Media Converter can supervise the real time situation of remote manageable fiber media converter and set the functions.
With this system, the response speed of the operator is quickened, the daily maintenance and network expenditure of the operators are reduced, and the serving quality of them is enhanced.
Features
· Built-in IP-based Web Interface
· Supporting remote and local management
· Supporling IEEEE 802.3X Frame Flow Control for Full-Duplex mode
· Store and Forward mechanism
· Manual IP address setting/DHCP client for IP address assignment
· SNMP v1 / v2c monitor / private Enterprise MIB
· Event trap and SNMP trap support
· Speed duplex mode configuration / Flow Control setting / bandwidth Control on TP / Fiber port
· Supports Port Status / Ethernet Statistics on both TP and Fiber intertace
· Supports Maximum frame size to 16K bytes
· Loop detection / Broadcast / Multicast / Unicast storm control
· Management VLAN / 16 IEEE 802.1Q VLAN groups / Q-in-Q VLAN
· 802.1p Tag Priority / IP address priority / IP DSCP option in
· Quality of Service Mode and Strict Priority / Weighted Round Robin (WRR) QoS policies
· TS-1000 OAM / IEEE 802.3ah OAM / Loop Back Test
· 16 TCP / UDP Filter groups
· Password setting, IP setting and devices description setting through Planet Smart discovery utility
· Firmware upgrade via remote Web interface
· LED indicators for easy network diagnosing
· Reset Button at the front panel for the factory default reset
· Choice of fiber-connector from SC, LC, WDM, multi-mode / single-mode fiber /1000Base-SX / LX mini GBIC module
Technical Indexes
Standards &Protocols | IEEE802.3x full duplex on 10BaseT, 100BaseTX,1000BaseT IEEE802.3-2002 |
IEEE802.3u 100BaseTX IEEE802.3ab 1000BaseT IEEE802.3z 1000BaseX IEEE802.3ah-2004 | |
IEEE 802.1d Spanning Tree | |
IEEE 802.1w | |
IEEE 802.1p Qos | |
IEEE 802.1q VALN TAG IEEE802.3X Flow control | |
Connector | ST, SC, FC, LC |
Operating wavelength | 850nm, 1310nm at Multi-mode; 1310nm, 1550nm at single mode |
Optical fibers | Multi-mode: 50/125,62.5/125,100/140um; Single-mode: 8.3/125,8.7/125,9/125,10/125um |
Management port | 1 console (RJ45) |
Serial port configuration | 9600bps/8bit/none parity/1 stop bit/none low control |
User port | 10/100BaseTX 10/100/1000BaseTX (RJ45), Full/Half duplex; |
100Base-FX 1000Base-FX(SFP module) | |
Fiber link option | Dual fiber/single fiber (WDM) |
Max frame size | 1518 Bytes (100M);9728 Bytes (1000M) |
Transmission distance | Dual fiber: up to 100km |
Single fiber: up to 80km | |
Band width management | Support bandwidth control by step of64Kbps (N*64K) |
LLCF | Support Link loss carry forward (LLCF) |
Q-in-Q | Q-in-Qfunctionality(addanotherouter9100tag)makes the customer packets tunneled and unmodified through the providers network by using a provider configured 802.1QVLANtags,alleviating the burden of aggregation switch |
IEEE802.3ah OAM standard function |
LNK-102OAM/LNK-103OAM Series series has two working modes: Master and Slave. Central Office device works at Master mode, and Customer Premise device at Slave mode. The OAM functions are originated by Master device. |
Link monitoring | Report local events to remote device, including Critical Event (voltage and temperature abnormal) and Dying Gasp (power down). |
OAM discovery | Check if remote device has implemented/enabled IEEE802.3ah OAM function, and negotiate with remote device |
Working Temperature | 0℃~60℃ |
Working Humidity | 5%~90%(non-condensing) |
Storage Temperature | -10℃~70℃ |
Storage Humidity | RH: 5~90% non-condensing |
Power supply | 85VAC~265VAC or -40VDC~-57VDC |
Power consumption | ≤5W |
Người liên hệ: Mr. Michael Guo
Tel: 19928768315
Fax: 86-755-8312-8674
E-Link Gigabit Power Over Ethernet In phun 12 ~ 48VDC Đầu vào DIN Rail / Wall Mount
Cổng đơn 60W Cấp nguồn qua các thiết bị Ethernet Hỗ trợ Cài đặt Din Rail / Wall Mount
10/100 / 1000Mbps Công suất cao Poe In phun 95 watt 802.3bt Truyền 100m
48 Volt 2 Port Cisco POE Power Over Ethernet Injector 10 / 100 / 1000Mbps 15.4W
Bộ mở rộng quang Mini 4K HDMI Đầu vào USB đa chế độ không nén 300M
Bộ mở rộng sợi HDMI 4K SFP LC 80km Bộ mở rộng sợi quang đơn mode 10,3Gbps
SFP 5VDC HDMI qua Bộ mở rộng cáp quang Cổng Micro 4K USB 80Km
Bộ mở rộng cáp quang HDMI 4K * 2K HDCP 10,3Gbps SFP LC với âm thanh bên ngoài
Mini 3G / HD-SDI to Fibre Converter Extender với chức năng Tally hoặc RS485 Data
Bộ mở rộng video 3G-SDI SDI sang bộ chuyển đổi sợi quang qua đường truyền dài 20KM sợi quang
HD SDI To Fiber Optic Converter with Forward Audio
Ethernet over Fiber Converter SD/HD/3G-SDI + RS485/RS422/RS232 Data + 10/100M