Thông tin chi tiết sản phẩm:
Thanh toán:
|
Data Rate: | 4.25G | Fiber Type: | MM |
---|---|---|---|
Wavelength: | 850nm | Distance: | 500 meters |
Fiber: | Dual Fiber | Connector: | LC |
Điểm nổi bật: | sfp bidirectional transceiver,fiber optic transceiver module |
4.25G SFP Dual Fiber 500m Multimode SFP Optical Transceiver Module
Features
Applications
Description
The transceiver consists of three sections: a 850nm VCSEL laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
The transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA)1. They are compatible with Fiber Channel per FC-PI-2 Rev. 10.0. also simultaneously compatible with Gigabit Ethernet as specified in IEEE Std 802.3.
Absolute Maximum Ratings
Table 1 - Absolute Maximum Ratings
Parameter | Symbol | Min | Max | Unit |
Power Supply Voltage | Vcc-Vee | 0 | 3.6 | V |
Operating Case Temperature (Commercial) | Tc | 0 | 70 | °C |
Operating Case Temperature (Industrial) | Tc | -40 | +85 | °C |
Storage Temperature | Ts | -40 | +85 | °C |
Operating Humidity | - | 5 | 90 | % |
Recommended Operating Conditions
Table 2 - Recommended Operating Conditions
Parameter | Symbol | Min | Typical | Max | Unit | |
Operating Case Temperature | Standard | Tc | 0 | +70 | °C | |
Power Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | |
Power Supply Current | Icc | 240 | mA | |||
Data Rate | 4.25 | Gbps | ||||
Optical and Electrical Characteristics
Table 3 - Optical and Electrical Characteristics
Parameter | Symbol | Min | Typical | Max | Unit | Notes | ||
Transmitter | ||||||||
Date Rate | 4.25 | Gb/S | ||||||
Centre Wavelength | λc | 830 | 860 | nm | ||||
Spectral Width (RMS) | ∆λ | 1 | nm | |||||
Average Output Power (BOL) | Pout | -9 | -2.5 | dBm | 1 | |||
Extinction Ratio | ER | 5 | dB | |||||
Average Launch Power-OFF Transmitter |
Pout | -4.5 | dBm | |||||
Optical Eye Diagram | Fiber Channel Compliant | |||||||
Optical Rise/Fall Time(20%~80%) | tr/tf | 120 | ns | |||||
Data Input Swing Differential | VIN | 300 | 1800 | mV | 2 | |||
Input Differential Impedance | ZIN | 90 | 100 | 110 | Ω | |||
TX Disable | Disable | 2.0 | Vcc | V | ||||
Enable | 0 | 0.8 | V | |||||
TX Fault | Fault | 2.0 | Vcc | V | ||||
Normal | 0 | 0.8 | V | |||||
Receiver | ||||||||
Centre Wavelength | λc | 830 | 860 | nm | ||||
Receiver Sensitivity (BOL) | -15 | dBm | 3 | |||||
Receiver Overload | 0 | dBm | 3 | |||||
LOS De-Assert | LOSD | -20 | dBm | |||||
LOS Assert | LOSA | -25 | dBm | |||||
LOS Hysteresis | 0.5 | 6 | dB | |||||
Receiver Reflectance | -20 | dB | ||||||
Data Output Swing Differential | Vout | 350 | 1800 | mV | 4 | |||
Loss of Signal (LOS) Assert Time | TAssert | 500 | nS | |||||
Loss of Signal (LOS) DeassertTime | TDeassert | 500 | nS | |||||
LOS | High | 2.0 | Vcc | V | ||||
Low | 0 | 0.8 | V | |||||
Notes:
1. The optical power is launched into MMF.
2. PECL input, internally AC-coupled and terminated.
3. Measured with a PRBS 27-1 test pattern @1250Mbps, BER ≤1×10-12
4. Internally AC-coupled.
Timing and Electrical
Table 4 - Timing and Electrical
Parameter | Symbol | Min | Typical | Max | Unit |
Tx Disable Negate Time | t_on | 1 | ms | ||
Tx Disable Assert Time | t_off | 10 | µs | ||
Time To Initialize, including Reset of Tx Fault | t_init | 300 | ms | ||
Tx Fault Assert Time | t_fault | 100 | µs | ||
Tx Disable To Reset | t_reset | 10 | µs | ||
LOS Assert Time | t_loss_on | 100 | µs | ||
LOS De-assert Time | t_loss_off | 100 | µs | ||
Serial ID Clock Rate | f_serial_clock | 400 | KHz | ||
MOD_DEF (0:2)-High | VH | 2 | Vcc | V | |
MOD_DEF (0:2)-Low | VL | 0.8 | V |
Diagnostics
Table 5 – Diagnostics Specification
Parameter | Range | Unit | Accuracy | Calibration |
Temperature | 0 to +70 | °C | ±3°C | Internal / External |
-40 to +85 | ||||
Voltage | 3.0 to 3.6 | V | ±3% | Internal / External |
Bias Current | 0 to 100 | mA | ±10% | Internal / External |
TX Power | -9 to -3 | dBm | ±3dB | Internal / External |
RX Power | -23 to -3 | dBm | ±3dB | Internal / External |
Người liên hệ: Mr. Michael Guo
Tel: 19928768315
Fax: 86-755-8312-8674
E-Link Gigabit Power Over Ethernet In phun 12 ~ 48VDC Đầu vào DIN Rail / Wall Mount
Cổng đơn 60W Cấp nguồn qua các thiết bị Ethernet Hỗ trợ Cài đặt Din Rail / Wall Mount
10/100 / 1000Mbps Công suất cao Poe In phun 95 watt 802.3bt Truyền 100m
48 Volt 2 Port Cisco POE Power Over Ethernet Injector 10 / 100 / 1000Mbps 15.4W
Bộ mở rộng quang Mini 4K HDMI Đầu vào USB đa chế độ không nén 300M
Bộ mở rộng sợi HDMI 4K SFP LC 80km Bộ mở rộng sợi quang đơn mode 10,3Gbps
SFP 5VDC HDMI qua Bộ mở rộng cáp quang Cổng Micro 4K USB 80Km
Bộ mở rộng cáp quang HDMI 4K * 2K HDCP 10,3Gbps SFP LC với âm thanh bên ngoài
Mini 3G / HD-SDI to Fibre Converter Extender với chức năng Tally hoặc RS485 Data
Bộ mở rộng video 3G-SDI SDI sang bộ chuyển đổi sợi quang qua đường truyền dài 20KM sợi quang
HD SDI To Fiber Optic Converter with Forward Audio
Ethernet over Fiber Converter SD/HD/3G-SDI + RS485/RS422/RS232 Data + 10/100M