Thông tin chi tiết sản phẩm:
Thanh toán:
|
Maximum Distance: | Cat5 UTP up to 100m | Connector: | 1x RJ45 |
---|---|---|---|
Optical Port: | 1 x Fiber SC/FC/SFP available | Forward Filter Rate: | 1,488,000pps (1000Mbps) |
Input Power: | 110~220V DC | Power Consumption: | 60W |
Standard: | IEEE802.3af & IEEE802.3at | Mounting Options: | Wall-mount |
Casing: | Metal Case | Warranty: | 2 years |
Điểm nổi bật: | power over ethernet gigabit switch,poe powered gigabit switch |
10/100/1000M Ethernet POE Switch , PoE Media Converter with PoE Reset Function
Technical Indexes
Ethernet | |
Standards: | IEEE802.3ab 1000Base-T |
IEEE802.3az Gigabit Fiber | |
IEEE802.3af Power over Ethernet | |
IEEE802.3at Power over Ethernet | |
IEEE802.3x Flow Control | |
Processing Type: | Forward |
Half-duplex, Full-duplex | |
Forward Filter Rate: | 1,488,000pps (1000Mbps) |
Cabling: | 1000Base-T: Cat5 or above |
Maximum Distance: | Cat5 UTP up to 100m |
Connector: | 1x RJ45 |
Optical Port: | 1 x Fiber (SC/FC/SFP available |
Environmental | |
Operating Temperature: | 0°C to 50°C (32°F to 122°F) |
Storage Temperature: | -20°C to 70°C (-4°F to 158°F) |
Relative Humidity: | 5% to 95% non-condensing |
Electrical and Mechanical | |
Input Power: | 110~220V DC |
Power Consumption: | 60W |
PoE: | |
Standard: | IEEE802.3af & IEEE802.3at |
Port: | RJ45 |
PoE Reset Function | Ideal for remotely resetting equipment, this configurable function performs a momentary power reset to the attached Powered Device (PD). When enabled, the media converter will, upon loss of fiber RX, turn off PSE output power supplied to the PD device for 2 seconds then turn the power back on and leave it on until such time that another fiber RX link is lost (after it was re-established). When disabled, a loss of fiber RX has no effect on PSE power to the PD device(s). |
LED Indicators | |
Max. Power: | 30W Max per port (Alternative B Mode) |
Power: | Power Status |
1000TX: | Link/Activity, Speed |
Fiber: | Link/Activity |
Casing: | Metal Case |
Mounting Options: | Wall-mount |
Regulatory Approvals | |
ISO9001 | |
FCC part 15, Class A | |
EN55022:2006+A1: 2007 Class A | |
Surge Protection: | |
RJ45: 1KV | |
Power: 500W | |
ESD: 4kV/8kV |
Overview
E-link 10/100/1000M PoE Ethernet to Fiber Converters provide an economical path to extend the distance of an existing network with fiber cabling. At the same time they function as PoE injectors to power devices like IP phones, video conferencing equipment, IP cameras and Wi-Fi devices over copper UTP cabling. E-link has PoE media converter models that support the IEEE 802.3af PoE standard (15.4W of power) or the IEEE 802.3at PoE+ standard (30W of power). In addition, with PoE reset function, a loss of Fiber RX will disable PSE power output on the UTP port for 2 seconds to allow remote device to re-initialize.
Features
Contact Information:
Skype: elinkchina003
Tel: +8675583128674
WhatsApp: +8613926522845
Người liên hệ: Mr. Michael Guo
Tel: 19928768315
Fax: 86-755-8312-8674
E-Link Gigabit Power Over Ethernet In phun 12 ~ 48VDC Đầu vào DIN Rail / Wall Mount
Cổng đơn 60W Cấp nguồn qua các thiết bị Ethernet Hỗ trợ Cài đặt Din Rail / Wall Mount
10/100 / 1000Mbps Công suất cao Poe In phun 95 watt 802.3bt Truyền 100m
48 Volt 2 Port Cisco POE Power Over Ethernet Injector 10 / 100 / 1000Mbps 15.4W
Bộ mở rộng quang Mini 4K HDMI Đầu vào USB đa chế độ không nén 300M
Bộ mở rộng sợi HDMI 4K SFP LC 80km Bộ mở rộng sợi quang đơn mode 10,3Gbps
SFP 5VDC HDMI qua Bộ mở rộng cáp quang Cổng Micro 4K USB 80Km
Bộ mở rộng cáp quang HDMI 4K * 2K HDCP 10,3Gbps SFP LC với âm thanh bên ngoài
Mini 3G / HD-SDI to Fibre Converter Extender với chức năng Tally hoặc RS485 Data
Bộ mở rộng video 3G-SDI SDI sang bộ chuyển đổi sợi quang qua đường truyền dài 20KM sợi quang
HD SDI To Fiber Optic Converter with Forward Audio
Ethernet over Fiber Converter SD/HD/3G-SDI + RS485/RS422/RS232 Data + 10/100M